Table of Contents
Advertisement
2.3 Menu Function (Receipt)
Overview
The menu function is the local function that sets each mode to control the printer and adjust it. This mode has the following
items, saved in the E2P-ROM. This information is printed only when the menu mode is activated at Power On, and the
information can be overwritten from the operator panel.
Menu Print is printed in Receipt Mode.
The menu determines the initialization state of each mode.
2.3.1 OEM — Standard Model
No.
1
Auto Cutter Unit
2
MICR Unit
3
Print Registration
4
Top Adjust
5
Cut Adjust
6
Width of Roll Paper
O = default value
Note
For No. 3, 4, and 5, adjust to the proper values at factory shipment.
Item
Selects Auto Cutter Unit
Installed/Not Installed
Selects MICR Unit Installed/Not
Installed
Adjusts the print position if it
shifts in Forward printing and
Reverse printing
Adjusts Top of Form position
when Slip/Sprocket are used
Adjusts Cut Position when cutting
Sprocket paper
Selects the paper width of Roll
paper.
(Changes the print area)
A25006.doc
Function
O Yes
O No
0.25mm Right
0.20mm Right
0.15mm Right
0.10mm Right
0.05mm Right
0
0.05mm Left
0.10mm Left
0.15mm Left
0.20mm Left
0.25mm Left
-1.75mm ~+1.75mm
*Can be set in the 0.35mm
unit
*Default value: 0 mm
-1.75mm ~+1.75mm
*Can be set in the 0.35mm
unit
*Default value: 0 mm
O 76.2mm
Sets
No
Yes (CMC-7)
Yes (E-13B)
69.5mm
Developer's Guide: English
|
37
Advertisement
Table of Contents
