Led Indication - Oki POS 425D Developer's Manual

4.1.2 LED Indication

Table412.doc
No. LED
1 LED 1 Red
(ERROR)
2 LED 2 Orange
(STATUS)
o425_106.jpg
|
OKIPOS 425D
60
ON
[Recoverable Alarms]
Slip Load Alarm
Slip paper was not loaded correctly. Remove it and
reload it.
Slip Exit Alarm
Slip paper did not exit correctly. Remove the Slip
paper.
Auto Loading Alarm
Sprocket paper was not loaded correctly. Set it at
the correct position of the Tractor and do the loading
operation again.
Auto Parking Alarm
Sprocket paper did not eject correctly. Do the
parking operation again. If the paper does not move
through the Tractor Gear turns, remove it manually.
Media Mismatch Alarm
Media different from the one the printer is trying
to print on has been set. Change the print mode or set
the correct media.
Cover Open Alarm
Close the printer cover.
Media has not been loaded (Waiting for loading)
state.
Load the media.
BLINK
Fatal Alarm (see Section 4.1.1)
SP Thermal Alarm (blinks
simultaneously with LED2)
The print head area has become
hot. As soon as the temperature goes
down, the printer recovers
automatically.
LF Thermal Alarm
The LF Motor has become hot. As
soon as the temperature goes down,
the printer recovers automatically.
Waiting for Media to be removed.
Remove the media.
SP Thermal Alarm (blinks
simultaneously with LED1)
The print head area has become
hot. As soon as the temperature goes
down, the printer recovers
automatically.