Table of Contents
Advertisement
1.5.1.4 Loading the Roll Paper (Journal)
Use roll paper that matches the specifications.
Note: The printer must be turned on before installing the roll paper.
1.
Fold the paper so it is exactly straight and even (1), and will not tear off jaggedly (2).
OP425_01b.eps
1
2.
Turn on the printer, open the printer cover, and remove the rewinder.
3.
Insert the roll paper as shown below.
o425_58.jpg
4.
With the right side of the roll paper adjusted to the rightmost, insert the paper tip into the paper inlet as far as it goes, and
printer feed the roll paper until the paper comes out from the top of the printer.
5.
When using the rewinder, follow the steps and the illustration below.
1) Turn the flange into the arrow direction and remove it.
o425_93.jpg
2
2
Developer's Guide: English
|
21
Advertisement
Table of Contents
