ZyXEL Communications GS1200 SERIES User Manual page 37

The following table describes the labels in this screen.
Table 10 Storm Control
LABEL DESCRIPTION
Broadcast Storm Enable traffic storm control on the Switch by specifying how many broadcast packets a port
Control receives per second. Otherwise, select no limit to disable this feature.
Loop Detection / This field is available only on the GS1200-8HP.
Prevention
Select Loop Detection to allow the Switch to shut down a port automatically when it
detects a loop on the port. The port becomes active when the loop disappears.
Select Loop Prevention to allow the Switch to shut down a port automatically when it
detects a loop on the port. After resolving the loop problem on your network, you need to
enable the port manually in the System screen.
Select Off to disable this feature.
Apply Click Apply to save your changes to the Switch.
Chapter 10 Storm Control
GS1200 Series User's Guide
37