ZyXEL Communications GS1200 SERIES User Manual page 19

Enter 2 in the VLAN ID field for the VLAN2 network.
2
Since the VLAN2 network is connected to port 1 on the Switch, configure port 1 to be a permanent
3
member of the VLAN. To ensure that VLAN-unaware devices (such as computers and hubs) can
receive frames properly, set the port's box color to green to set the Switch to remove VLAN tags
before sending.
Change the box color of other ports to gray.
4
Click Apply to save the settings.
5
Chapter 5 Initial Setup Example
GS1200 Series User's Guide
19