Port-Based Vlan - ZyXEL Communications GS1200 SERIES User Manual

Select the IEEE 802.1Q VLAN option in the VLAN screen.
1
Click Create New VLAN and enter a VLAN ID number (123 in this example).
2
Click the port's check box to add it to the VLAN group by changing the box color to green
3
(untagging) or orange (tagging). Set the port's box color to gray if the port is not a member of the
VLAN group.
Click Apply to save your changes.
4

8.2.2 Port-Based VLAN

Figure 15 VLAN: Port-Based VLAN
The following table describes the labels in this screen.
Table 7 VLAN: Port-Based VLAN
LABEL
Maximum
number of Port-
Based VLAN
Group ID
01 ~ 08
01 ~ 05
Delete
Add VLAN
Apply
Chapter 8 VLAN
DESCRIPTION
This shows the maximum number of port-based VLANs you can have on the Switch.
This is the ID number of the VLAN group.
This displays the ports that are participating in a VLAN. Select a port's check box to add it to
the VLAN. A port can only belong to one port-based VLAN.
Click Delete to remove the VLAN group. You cannot delete the default VLAN.
Click this button to configure a new port-based VLAN for the Switch.
Click this button to save your changes to the Switch.
GS1200 Series User's Guide
30