Change Your Password; Switch Lockout - ZyXEL Communications GS1200 SERIES User Manual

The following table describes the links in the navigation panel.
Table 3 Navigation Panel Links
LINK
System
Switch MGMT
VLAN
QoS
Storm Control
IGMP Snooping
PoE

4.3.1 Change Your Password

After you log in for the first time, it is recommended you change the default administrator
password. Click Switch MGMT to display the next screen.
Figure 9 Change Administrator Login Password

4.4 Switch Lockout

You could block yourself (and all others) from managing the Switch if you do one of the following:
Remove all ports from the management VLAN (default is VLAN 1).
1
Chapter 4 The Web Configurator
DESCRIPTION
This link takes you to a screen that displays general system information and individual port
statistics . You can also configure the IP address and subnet mask, and unlock a port
This link takes you to screens where you can change the system login password, perform
firmware and configuration file maintenance as well as reboot the system.
This link takes you to a screen where you can configure port-based or 802.1Q VLAN.
This link takes you to a screen where you can configure port-based or IEEE 802.1p QoS.
This link takes you to a screen to enable broadcast storm control and loop prevention/
detection. Loop prevention/detection is not available on the GS1200-5HP.
This link takes you to a screen where you can configure IGMP snooping.
This link takes you to a screen where you can enable or disable PoE on a PoE port.
GS1200 Series User's Guide
16