Table of Contents
Advertisement
The following table describes the labels in this screen.
Table 4 System
LABEL
DESCRIPTION
System Information
Model Name
This field displays the model name of this Switch.
Device Name
This field displays the name used to identify the Switch on any network. The device name is
a link that you can click to open a screen where you can change the name.
Firmware
This field displays the version number and date of the firmware the Switch is currently
Version
running.
Loop Status
This field displays whether the Switch is in a loop state.
PoE Status
This field displays On when a powered device (PD) is receiving power from the Switch.
Otherwise, it displays Off.
MAC Address
This field displays the MAC addresses of the Switch.
IP Address
The Switch needs an IP address for it to be managed over the network. The factory default
IP address is 192.168.1.3.
This field displays the Switch's current IPv4 address. The IP address is a link that you can
click to open a screen where you can change the IP address and subnet mask.
Subnet Mask
The subnet mask specifies the network number portion of an IP address. The factory default
subnet mask is 255.255.255.0.
This field displays the Switch's subnet mask. The subnet mask is a link that you can click to
open a screen where you can change the IP address and subnet mask.
Per Port Status
Chapter 6 System
GS1200 Series User's Guide
23
Hide quick links:
Advertisement
Table of Contents
