Bosch CCS 1000 D Operation Manual page 50

50 en | Configuration
Upgrade
Notice!
Upgrade is not available on tablets.
–
–
–
–
–
–
–
Click the Upgrade button to open the software upgrade page.
The Upgrade page is used to upgrade/maintain the software of the control unit:
1.
2.
3.
4.
5.
6.
2016.05 | V2.0 |
Select: Used to select and deselect products (rows) on the Upgrade page.
Device name: The name of the product being upgraded.
Type: Type of product being upgraded.
Version: Software version that the product will be upgraded to.
State: State of the software upgrade (Idle, Programming, Rebooting, Done, or Failed
after reboot). If the upgraded file is corrupt or not recognized, an error message is
displayed.
Progress: Progress bars for indicating the status of the software upgrade.
Start button: Starts the software upgrade.
Download the upgrade software file from the product related page at: https://
licensing.boschsecurity.com/software
From the upgrade page, click in the file box to select your saved software file.
If you selected a correct firmware file, the control unit is selected automatically.
Click the start button to start the upload process:
– Progress bars are displayed.
– The upload status is shown in the 'state' column. If the upgraded file is corrupt or
not recognized, an error message is displayed.
– Software versions (numbers) are shown in the 'version' column. The uploaded
software version number is only shown when the upgrade is successfully completed.
Exit the upgrade page after completion of the upload process ('done'state).
Clear the browser cache (history), so that the new functionality is displayed in the web
browser.
Operation manual
Digital Discussion System
Bosch Security Systems B.V.