Key Combinations - Bosch CCS 1000 D Operation Manual

34 en | Configuration
7.1.2

Key combinations

Key combinations can be selected on the front panel of the Control Unit to reset or initialize
system settings (refer to the following table).
Push and hold in the key combinations for a few seconds until the LEDs on the front panel
change status.
Option
De‑initialize Discussion Devices
Erases the addresses of all Discussion Devices. All LEDs
on a Discussion Device go on when the address is erased.
Initialize each of the Discussion Devices, as described in
Initialize Discussion Device, page 37.
Reset login details
Resets the following for the web browser interface:
– the admin account password.
– the network settings.
Use this option if you have forgotten the hostname or
password.
Set factory defaults
Resets all system settings and values to the factory
defaults.
Notice!
When the system is reset to the factory defaults, the latest version of the software that the
system was upgraded to will be maintained.
2016.05 | V2.0 |
Key combinations on Control Unit
Operation manual
Digital Discussion System
Bosch Security Systems B.V.