Bosch CCS 1000 D Operation Manual page 31

Digital Discussion System
Number Item
3 Buttons and LED indicators
for volume control of
Discussion Devices
4 Buttons and LED indicators
for volume control of
loudspeaker or headphones
connected to the
CCSD‑CURD.
5 Discussion-mode button
6 Discussion mode LED
indicators
7 Speakers list size
8 Speakers list size LED
indicators
Bosch Security Systems B.V.
Description
Plus/minus buttons for setting the volume of all Discussion Devices and
Audio Out (1).
The LED indicators show the selected volume in four steps of
brightness per LED from left to right.
Note: Audio Out (2) is not influenced by any setting.
Plus/minus buttons for setting the volume of:
– the built‑in loudspeaker, or
– headphones, if connected.
The LED indicators show the selected volume in four steps of
brightness per LED from left to right.
Button for selecting one of the four discussion modes. Used in
combination with the discussion‑mode LED indicators (6).
LED indicators for showing the selected discussion mode. The following
modes are indicated from left to right:
– Open mode
– Override mode
– Voice activation mode
– Push to talk (PTT) mode
Note: If all LED indicators are off, 'open mode' is selected and 'auto
shift' in the Prepare discussion page of the web browser interface is
set to off.
For detailed information on the discussion modes, see Discussion
modes, page 33.
Button for selecting the number of microphones that can be activated
at the same time. Used in combination with the speakers list size LED
indicators (8).
A maximum of four microphones can be selected from the Control Unit
If the web browser interface is used, a maximum of ten microphones
can be selected.
LED indicators for showing the number of activated (open)
microphones.
1 to 4 open microphones: the LEDs are individually lit to show the
number of open microphones.
5 to 10 open microphones: a combination of LEDs are lit to show the
number of open microphones; for example, if there are six open
microphones, LED numbers 2 and 4 are lit.
Operation manual
Configuration | en 31
2016.05 | V2.0 |