Bosch CCS 1000 D Operation Manual page 15

Digital Discussion System
LBB 4117/00 Cable Locking Clamps (25 pcs) – This cable locking clamp can be used to lock
the connectors of extension cables. One cabling locking clamp is required for each male/
female connector.
USB memory stick (CCSD‑CURD only) – A correctly formatted USB memory stick is required if
you want to record discussions directly to an external device. Refer to the following
information:
–
–
–
–
–
USB cable with micro USB connector - A USB cable with a micro USB connector is required if
you want to transfer the internal memory (recordings) to a PC.
RJ45 Ethernet cable - An RJ45 Ethernet cable is required if you want to connect a laptop or
PC to the control unit for running the web browser interface and connecting system cameras.
RCA cables - RCA cables are required if you want to connect optional audio equipment to the
Control Unit, such as a sound reinforcement system.
XLR cable - An XLR cable is required if you want to connect an external microphone to the
Control Unit.
Wireless Access Point (WAP) - A commercially available wireless access point or router is
required if you want to connect equipment with a WiFi connection to the system.
Bosch Security Systems B.V.
Preferred type: Sandisk.
Maximum size: 128 GB.
Formatting: The USB memory stick must be formatted to the FAT32 file system. If
required, the USB memory stick can be formatted using:
– the recommend formatting tool on the DVD supplied with the Control Unit. This tool
can also be downloaded from the relevant product page on: www.boschsecurity.com
– the Windows default formatting tool. This tool can only format USB memory sticks
up to 32 GB to the FAT32 file system.
Partition: Device with single FAT32 partition.
Partitioning scheme: Must be MBR (GPT is not supported).
Note: The partitioning scheme can also be changed with the formatting tool.
Operation manual
Planning | en 15
2016.05 | V2.0 |