Setup Utilities - Oki C7500 V2 Network Manual

Printing the Network Interface Card Configuration Sheet
The printer's configuration page reports information that is required
for NetWare configuration. To print a configuration page, while the
printer is switched on, depress the NIC's push-button for three
seconds and then release.
The information that you require is the printer's Ethernet address. The
first six characters of the Ethernet address are the same for all OkiLAN
8100e network interfaces. The last six characters of the Ethernet
address are unique to each card
This is all the information that is required to setup the printer for
NetWare.

Setup Utilities

Use NWAdmin32 or the Pconsole utility to create and setup NetWare
printer objects. Please refer to Novell documentation for instructions
on how to achieve this.
Use the OKI Network Card Setup Utility (AdminManager) or other
printer manager software, (Web browser, JetAdmin, etc.) to configure
the network interface card. For instructions please refer to the
Novell NetWare 70