Table of Contents
Advertisement
Windows 2000
1.
Click the [Start] button, select [Settings] and then click on
[Network and Dial-up Connections].
2.
Double-click the [Local Area Connection] icon. In the [Local Area
Connection Status] dialogue box, click the [Properties] button.
3.
If the TCP/IP protocol is not listed, in the [Local Area Connection
Properties] dialogue box, click the [Install] button.
4.
In the [Select Network Component Type] dialogue box, select
[Protocol] and click the [Add] button.
5.
In the [Select Network Protocol] dialogue box, select [TCP/IP
Protocol] and click the [OK] button.
6.
Click the [Close] button in the [Local Area Connection
Properties] dialogue box.
7.
Click the [Close] button in the [Local Area Connection Status]
dialogue box.
Windows XP
1.
Click the [Start] button and select [Control Panel].
2.
Select [Network and Internet Connection] and [Network
Connection].
3.
Double-click [Local Area Connection] and click [Properties] in
the [Location Area Connection Status] dialogue box.
4.
If the [Internet Protocol (TCP/IP)] is not listed, click [Install..]
button.
5.
In the [Select Network Component Type] dialogue box, select
[Protocol] then click the [Add] button.
Microsoft Windows 52
Advertisement
Table of Contents
