Level1
11: Display status
12: IP Filtering Setup
97: Network Reset
98: Set default
(Network)
99: Exit setup
5.
When configuration is complete, select [Exit Setup] to save your
change. To exit without saving your modification, select [Quit].
6.
Turn the printer off and on again.
The network card continues to use pre-transmission settings until the
printer is turned off and back on again.
Level2
1: prn1
2: Network
3: Version
99: Back to prior menu
1: IP Filtering
2: IP Address range 1 ~
11: IP Address range 10
12: Admin IP Address
99: Back to prior menu
—
—
—
Network Configuration 38
Level3
—
—
—
1: Start Address
2: End Address
3: Printing
4: Configuration
99: Back to prior menu
—
—
—