Table of Contents
Advertisement
SNMP Tab
This allows you to configure SNMP related items.
Location
Comments
Authentic
This community name is used to check whether incoming SNMP
Community
requests have the correct community name or not. The community
name is displayed as ****** for security reasons.
TRAP Community This community name is assigned to outgoing system traps such as
cold start, authentication failure, etc.
TRAP Address
Set a destination IP address of a Trap packet. If 0.0.0.0 is set, the Trap
is disabled.
SysContact
Set SysContact (printer manager) name.
SysName
Set SysName (printer model name).
SysLocation
Set SysLocation (the location where the printer is installed).
Default TTL
Set TTL (Time To Live) value.
Enable Authentic
Set Authentic Trap to enabled/disabled.
Trap
Network Configuration 19
Advertisement
Table of Contents
