Oki Device Setup - Oki C7500 V2 Network Manual

Oki Device Setup

Oki Device Setup allows you to configure the network interface. Type
the root password (default value is the last 6 characters of the MAC
address) to configure. Remember that the root password is case
sensitive and if the MAC address contains any alpha characters, type
them as upper case. Oki Device Setup contains details for the
following selectable tabs:
> General
> TCP/IP
> NetWare
> NetBEUI
> EtherTalk
The following section explains each tab's functionality. Depending on
your printer, some items in the following explanation may not be
displayed.
General Tab
This allows you to set or change the root password used for Admin
Manager, TELNET and FTP.
Location
Change root password You can set/change the root password for AdminManager,
>
>
>
>
Comments
TELNET and FTP.
Network Configuration 14
SNMP
POP
SMTP
Maintenance