Oki C7500 V2 Network Manual page 21

Oki printer network guide
Hide thumbs Also See for C7500 V2:
Table of Contents

Advertisement

Location
Comments
Printer Trap
Detail . . .
Setup . . .
IPX
Detail . . .
Off-line
Paper Out
Paper Jam
Cover Open
Printer Error
Set node address and network address to which
a Trap packet will be sent.
By selecting the button, the following dialogue
box is displayed:
In the dialogue box, the following items can be
configured:
Trap Enable
Printer Reboot
Receive Illegal
Network Configuration 21
Set sending a Trap,
enabled or disabled,
when the printer turns
to OFF-LINE.
Set sending a Trap,
enabled or disabled,
when paper is out.
Set sending a Trap,
enabled or disabled,
when a paper jam
occurs.
Set sending a Trap,
enabled or disabled,
when the printer cover
opens.
Set sending a Trap,
enabled or disabled,
when any errors occur.
Set sending a Trap
packet, enabled or
disabled, for each
destination.
Set sending a Trap
packet, enabled or
disabled, when the
printer is rebooted.
Set sending a Trap
packet, enabled or
disabled, when the
printer receives an
illegal Trap packet.

Advertisement

Table of Contents
loading

This manual is also suitable for:

C9500 v2C7300 v2C9300 v2B4400lB4600

Table of Contents