Table of Contents
Advertisement
10. Confirm your configuration. If everything is correct, select
[Execute] to apply the configuration. Set-up has now been
completed. Select [Finish].
Now that both Windows and the printer have been configured to use
TCP/IP, the next step is to configure Windows to print to the network
printer.
Windows 95/98/Me
When printing using TCP/IP the OkiLPR utility is the only option to use.
The following procedure should be used.
When installing the driver, ensure it is installed as a local printer and
not a network printer. Ensure the appropriate printer driver has been
installed in Windows.
Install the OkiLPR utility as described on page 47 of this manual and
add the printer installed earlier.
Microsoft Windows 55
Advertisement
Table of Contents
