Table of Contents
Advertisement
This field supports two functions.
•
When enabled, the system will power-on to respond to calls coming
through an external or internal modem. Refer to “Wake-On-Ring
Connector” in chapter 2 for more information.
•
When enabled, the LAN card in the system will allow the network
to power-on a Soft Power Down (Soft-Off) PC. However, if your
system is in the Suspend mode, you can wake up the system only
through an IRQ or DMA interrupt. Your LAN card must suppor t
the remote wake up function. Refer to “Wake-On-LAN Connector”
in chapter 2 for more information.
Enabled
When Enabled, you can set the date and time you
would like the Soft Power Down (Soft-Off) PC to
power-on in the “Date (of Month)” and “Resume
Time (hh:mm:ss)” fields. However, if the system is
being accessed by incoming calls or the network
prior to the date and time set in these fields, the
system will give priority to the incoming calls or
network.
Disabled
Disables the automatic power-on function. (default)
0
The system will power-on everyday according to the
time set in the “Resume Time (hh:mm:ss)” field.
1-31
Select a date you would like the system to power-on.
The system will power-on on the set date, and time set
in the “Resume Time (hh:mm:ss)” field.
This is used to set the time you would like the system to power-on.
If you want the system to power-on everyday as set in the “Date
(of Month)” field, the time set in this field must be later than the
time of the RTC set in the Standard CMOS Features submenu.
Award BIOS Setup Utility
3
83
Advertisement
Table of Contents
