Table of Contents
Advertisement
3
Award BIOS Setup Utility
↑↓→←
The settings on the screen are for reference only. Your version may not be
identical to this one.
Detects the parameters of the dr ive. The par ameters will
automatically be shown on the screen.
If you wish to define your own drive type manually, select “Manual”.
The drive type information should be included in the documentation
from your hard disk vendor. If you select ”Auto”, the BIOS will auto-
detect the HDD & CD-ROM drive at the POST stage and show
the IDE for the HDD & CD-ROM drive. If a hard disk has not
been installed, select “None”.
For hard drives larger than 528MB, you would typically select the
LBA type. Certain operating systems require that you select Normal
or Large. Please check your operating system’s manual or Help desk
on which one to select.
Displays the approximate capacity of the disk drive. Usually the size
is slightly greater than the size of a formatted disk given by a disk
checking program.
56
Advertisement
Table of Contents
