Table of Contents
Advertisement
2.4 Jumper Settings for Selecting the CPU’s Front
Side Bus
100MHz (200MHz FSB)
CPU Front Side Bus Select - Jumper JP4
This jumper is used to select the front side bus of the CPU installed
on the system board.
Warning:
To ensure proper boot up and operation of your system, you
must power-off the system then turn off the power supply’s
switch or unplug the AC power cord prior to altering the
setting of the jumper.
CPU FSB
select (JP4)
2
1
On:
(default)
Hardware Installation
2
1
2
1
Off:
133MHz (266MHz FSB)
2
21
Advertisement
Table of Contents
