Table of Contents
Advertisement
3
Award BIOS Setup Utility
Any Key
Disable
Ctrl+F1 to Ctrl+F12
This field, when enabled, allows you to use the PS/2 mouse to wake
up the system from the S3/S4/S5 state.
This field, when enabled, allows you to use a USB 2.0 or USB 1.1
device to wake up the system.
When set to On, the system will respond and wake up to any VGA
activity.
Select the port you would like the system to respond and wake up
when an event occurs on that port.
When set to On, the system will respond and wake up to any hard
drive or floppy drive activity.
When set to On, the system will respond and wake up to any PCI
or bus master activity.
This field should be set to Enabled only if your PCI card such as
LAN card or modem card uses the PCI PME (Power Management
Event) signal to remotely wake up the PC. Refer to the card’s
documentation for more information.
82
Use any keyboard keys to wake up the system
from the S3/S4/S5 state.
Disables the keyboard wakeup function.
Use any of these function keys to
wakeup the system from the S3/S4/S5
state.
Advertisement
Table of Contents
