Table of Contents
Advertisement
3
Award BIOS Setup Utility
1. Press <Del> then enter a new CPU temperature limit;
or
2. Allow the system to power-off after the 5 warning beeps then
check whether the heatsink and fan are mounted properly onto the
CPU because high CPU temperature may be due to incorrect fan/
heatsink installation. Now restart the system. If the same problem
persist, it may be that the CPU fan is damaged or it is not rotating
properly. Tr y replacing it with a new fan. If it is due to other
contributing factors that resulted to high CPU temperature, you
may need to set a lower CPU temperature limit.
CPU Temperature References
When you power-up a system, the BIOS message appears on
the screen and the memory count begins. After the memor y test,
the CPU temperature range is normally between 32
35
the system, the CPU temperature range at this time is between
40
when you select the CPU temperature limit.
These fields show the internal temperature of the system, current
temperature of the CPU, and the current fan speed of the CPU and
chassis fans in RPM (Revolutions Per Minute).
These fields show the voltage of the processor.
88
o
C. When you run an operating system then tried to reboot
o
C and 45
o
C. These temperature references serve as a guide
o
C and
Advertisement
Table of Contents
