Table of Contents
Advertisement
3
Award BIOS Setup Utility
field. Also, disable this field if you are installing or running certain
operating systems like Windows
operating system may not install nor work.
These fields speed up the memory access. The default value is
enabled. Enable the external cache for better performance.
The processors supported by the system board come with built-in
Level 2 cache. By default, ECC is enabled to check the Level 2 cache.
If you are not using this function, set this field to Disabled.
This field speeds up Power On Self Test (POST) after you power on
the system. When Enabled, the BIOS will shor ten or skip some check
items during POST.
If you want the system to boot from a drive that is connected to
the RAID IDE connector or SCSI add-in card, you must first select
“SCSI” in the “First Boot Device” field.
If there are drives connected to both the RAID IDE connector and
SCSI add-in card, you must then select the drive you want to boot.
RAID
SCSI
If the drive is connected to either one of them only, you don’t need
to particularly select an option in this field because the system will
automatically detect for the existing drive.
60
Boot the drive connected to the RAID IDE connector
that is on the system board.
Boot the drive connected to the SCSI add-in card that
is installed in a PCI slot.
95/98/2000/ME/XP or the
®
Advertisement
Table of Contents
