Table of Contents
Advertisement
3
Award BIOS Setup Utility
Move the cursor to this field and press <Enter>. The following
screen will appear.
The settings on the screen are for reference only. Your version may not be
identical to this one.
This field is relevant to the memory-mapped graphics data of the
AGP card installed in your system. Leave this in its default setting, which
is 64M.
This field is used to select the AGP mode of the AGP card installed
on the system board. The default setting is “4X”.
Set this field to Manual only if there are compatibility problems with
some AGP cards. When set to Manual, you must select a value in the
“AGP Driving Value” field.
This field is used to select a value for the AGP Driving control. We
recommend that you leave this field in its default setting.
68
↑↓→←
Advertisement
Table of Contents
