Oki OKILAN 3100e User Manual page 90

Is printer server's usable frame type 802.2 or 802.3
NO
Set print server's frame type to 802.2 or 802.3
YES
Is operation panel frame type Auto or does it match NetWare route
print server
NO
Set operation panel frame type to Auto or match
with router or print server. Must match with actua
YES
communication exchanges that are made.
Has print server started? See NetWare manual.
NO
Start print server. See NetWare manual.
YES
Are file server settings correct? Use OkiView (Oki Uty), NWADMIN
(Novell UTY) or PCONSOLE (Novell UTY) file server name - queu
name - print server name - printer name link made? Match with sett
contents of printer side?
NO Set file server correctly. NOTE: If NWADMIN is
used, advertising name must match print server
YES
name. If PCONSOLE is used, queue/print server l
must be done from both.
84
Is there excessive traffic or an abnormality occurred on the networ
YES
Find the source of the problem and return the
network to a normal state.
NO
Are other R-Printers connected to printer name set in both file serv
and printer
YES
Kill that connection or make new settings for the
NO
printer.
Used in NetWare/IP environment that have been capsulated by IP
YES
Does not support packets capsulated by IP. refe
NetWare/IP manual.
NO
Refer to Common Troubleshooting above.
END
OkiLAN 320e Network Card