Setting Ethertalk Environment - Oki OKILAN 3100e User Manual

<<NetWare Setting>>
Select NetWare Print Mode
AUTO=1 Q-Server (bindery)=2 Q-Server (NDS)=3 R-
Printer=4 EXIT=0: 1 [Enter]
<<Q-Server Mode (bindery) Setting>>
Print Server Name (1-47char) : pserver12i [Enter]
FileServer1 Name (1-47char) : nwserver [Enter]
FileServer2 Name (1-47char) : [Enter]
FileServer4 Name (1-47char) : [Enter]
FileServer5 Name (1-47char) : [Enter]
FileServer6 Name (1-47char) : [Enter]
FileServer7 Name (1-47char) : [Enter]
FileServer8 Name (1-47char) : [Enter]
Polling Rate (1-60sec) : 10 [Enter]
<<Q-Server Mode (NDS) Setting>>
Print Server Name (1-47char): pserver12i [Enter]
Tree Name (1-31char): NPRINTER [Enter]
Context Name: OU=DESIGN.OU=MFG.
O=ACME [Enter]
Polling Rate (1-60sec): 10 [Enter]
<<R-Printer Mode Setting>>
(default: Enter, skip: '.' , clear : '0')
Printer Name: op12i [Enter]
PrintServer1 Name (1-47char) : pserver12i [Enter]
PrintServer2 Name (1-47char) : . [Enter]
PrintServer3 Name (1-47char) : . [Enter]
PrintServer4 Name (1-47char) : . [Enter]
Do you re-setting? (y/n) : n [Enter]
OkiPage> logout (or exit or quit): [Enter]
Enter an appropriate command, without logging
out, if you want to set other protocols
50

Setting EtherTalk environment

Display/set the EtherTalk environment.
Display Command to use:
Target account:
Set Command to use:
Target account:
The EtherTalk environment has the following items to
be set:
AppleTalk Zone Name: Specify the zone to which the
printer will belongs to.
AppleTalk Printer Name: Set the name of the printer.
Setting procedure
The following setting procedure is explained using the
setting values as shown below:
Item
AppleTalk zone name
AppleTalk Printer name
1. Confirm the current settings.
OkiPage> show protocol
<<Protocol Status>>
NetWare Q-Server Mode (bindery)
Status
NetWare Q-Server Mode (NDS)
show protocol
or shpro
general users and
administrator user
set protocol or
sepro
administrator user
Setting value
*
OKIPAGE 14i
- - '1'
OkiLAN 3100e Network Card