Oki OKILAN 3100e User Manual page 21

Registering a printer in a print queue
1. Open [Print Server Information] from [Available
Options] and select a print server to which you
wish to attach a print queue from [Print Servers].
2. Open [Print Server Configuration] from [Print
Server Information].
3. Open [Printer Configuration] from [Print Server
Configuration Menu].
4. Select [Not Install] in [Configured Printers] and
press the Enter key. Then the Configuration
window opens with a default printer name.
5. Press the Enter key in the text box [Name:]. Then
you are prompted to enter a printer name. Type in
a printer name you wish to register. Make sure
not to use an already existing printer name.
6. Press the Enter key in the text box [Type:] and
select [Remote Other/Unknown] from [Printer
types].
7. Press the ESC key and select [Yes] in [Save
changes].
8. Press the ESC key repeatedly to return to
[Available Options].
Chapter 3 - Network Setup
9. Press the ESC key and select [Yes] in [Exit
PConsole]. The setup is completed.
Starting the print server and connecting the
network card
When print server is u sed on the file serv er ,
P S E R V E R . N L M h a s t o b e l o a d e d . T h e
PSERVER.NLM has been copied to SYS:SYSTEM
when the file server was installed.
1. Enter the following in the system console of the
file server: LOAD PSERVER print server name.
2. To exit the print server, press Alt key and Esc key
simultaneously to return to the system console
and enter the following: UNLOAD PSERVER
print server name
When workstation is used specifically as the print
server, PSERVER.EXE has to be executed. The
PSERVER.EXE and the relevant files have been copied
to SYS:PUBLIC when the file server was installed.
1. To start up the print server, these files must be
accessed. Log in to the file server and map the
search drive to SYS:PUBLIC or copy the
necessary files to the local floppy disk or hard
disk.
English
15