Table of Contents
Advertisement
2.
(Firmware Ver. 1.06 only) The printer does not
support Master Browser function. At least one
PC, which acts as the Master Browser, should
exist and the workgroup name of the printer
should match to one of workgroup names existing
on the network, otherwise an error is displayed on
the screen when the host tries to communicate
with the printer.
3.
If the printer stays off-line state more than 8
minutes, host(s) sending print job generate(s)
time-out and the print job is terminated.
Setting Windows NT4.0 Workstation
Refer to "Windows NT4.0 server" on page 8.
Setting Windows 2000 Professional
Refer to "Windows 2000 server" on page 10.
Setting Macintosh
Note:
This network card does not support
LocalTalk.
Installing the printer driver
Install the PostScript printer driver using the Installer
which comes with the OKIPAGE 14i.
36
Printer setup
1.
Connect the printer to the EtherTalk cable with
N E T W O R K = E NA B L E a n d E t h e r Ta l k
=ENABLE, then turn on the power to the printer.
2.
Open the Chooser from the Apple menu (Apple
icon) of the menu bar. If Zone is set in EtherTalk,
select the zone to which the printer has been
connected.
3.
When you select the PostScript printer driver
from the Chooser, network printers connected to
the EtherTalk are displayed.
4.
Select OKIPAGE 14i and click on [Set Up].
5.
In [Select PPD File], select PPD file of the
OKIPAGE 14i and click on [OK].
Note:
The PPD file is on the printer driver CD that
came with the printer.
Zone name and printer name
For this network card, the names of the zones currently
connected are automatically set to Zone Name for the
network card. The default value at the time of factory
shipping is * (asterisk).
OkiLAN 320e Network Card
Advertisement
Table of Contents
Troubleshooting
