(3)
into contact with the printer housing. Secure with
two screws (4).
7.
Connect the power supply and interface cables.
8.
Turn the printer on and take the printer off-line by
pressing ON-LINE button.
9.
Press MENU1 button for less than two second.
10. When PERSONALITY appears in message
window, continue pressing MENU1 button until
HOST I/F appears in the message window.
11. Press ENTER button.
12. Press MENU1 button twice.
4
(2)
(1)
(4)
13. Press either left arrow or right arrow and ENTER
button to change window message to NETWORK
ENABLE*.
14. If the message NETWORK does not appear in
message window, turn printer off and re-check
installation of the network card.
OkiLAN 320e Network Card