Table of Contents
Advertisement
4.
Select the [NetWare] tab and click on [Operating
Mode] from the left column. Set the print server
operating mode from the given options on the
right.
5.
If you are running a NetWare 4.x network, click
on [NetWare Directory Services] from the left
column. Select [NDS Tree Name] from the
pulldown menu and enter the [Print Server
Context].
6.
Click on [Queues] from the left column to bring
up the [Queues] screen and then click on
[Change].
7.
Select the desired queues from the list of
[Available Queues] to be added into services.
Click on [Service] to move the selection to the
[Serviced Queues] column. When all queues have
been added, click OK.
8.
Click on [OK] again to return to the main screen.
Setting TCP/IP environment
1.
From the main JetAdmin screen, select the
Okipage 14i you want to configure.
2.
Select [Modify] from the [Device] menu.
Chapter 4 - Administrating Network Printers
3.
in the [Configuration] screen, select the [General]
t a b a n d e n t e r t h e p r i n t s e r ve r n a m e a n d
description.
4.
Select the [TCP/IP] tab and set the print server IP
configuration.
Setting AppleTalk environment
1.
From the main JetAdmin screen, select the
Okipage 14i you want to configure.
2.
Select [Modify] from the [Device] menu.
3.
Under the [Optiona]l tab, select [Mac].
4.
Enter the AppleTalk name and click on [OK].
Obtaining diagnostic information
1.
From the main JetAdmin screen, select the
Okipage 14i you want to view diagnostic
information on.
2.
Select [Properties] from the [Device] menu.
3.
From
the
[Properties]
appropriate tab to view the desired diagnostic
information.
English
screen,
select
the
57
Advertisement
Table of Contents
Troubleshooting
