Oki OKILAN 3100e User Manual page 28

(h) Open [User Environment Setup] and
confirm that [Printer Type] is set to [Other/
Unknown]. The default of [Printer Type] is
[Parallel] and this must be set to [Other/
Unknown].
Setting up the remote printer using PCONSOLE
(except NetWare 5)
In order to use this network card in the remote printer
mode, you must set up the print queue, the print server
and the printer in the NetWare environment.
This section describes how to set them using
PCONSOLE of NetWare 4.x.
1. To start the NetWare client:
(a) Start the NetWare client PC. Log in to the
NetWare server from admin (or the account
to which the administrator privilege has been
granted).
(b) Start PCONSOLE.
22
2. To create a print queue:
(a) Select [Change context] from [Items that can
be used].
(b) Press Insert key in the text box [Enter
context:].
(c) Move the cursor to the directory where you
will create a print queue from [Object, Class]
and press F10 key. The context is displayed
at upper left area of the PCONSOLE screen.
Make sure that this matches with the context
you wish to have.
(d) Select [Print queue] from [Items that can be
used] and open the [Print queue] list.
(e) Press the Insert key, type the name of a print
queue you will create in the text box [New
print queue name:] and then press the Enter
key. Make sure not to use an already existing
print queue name.
(f) Press the Insert key in the text box [Print
queue volume:], select the volume where a
print queue will be created from [Object,
Class] and press the Enter key.
(g) The newly created print queue name is added
to [Print queue].
OkiLAN 320e Network Card