Oki OKILAN 3100e User Manual page 86

Has network excessive traffic or is there an abnormality?
NO
Find the source of the problem and bring the
YES
network back to a normal state.
Refer to Common Troubleshooting above
END
Cannot refer to printer settings or change them with
Telnet.
Can log in with Telnet. User name and password unnecessary. Fo
both, press Enter key.
NO
YES
Does login prompt user to input USER name displayed?
NO
YES
Is operation panel menu frame type set to Auto
Ether 2?
YES
80
NO
Set to Auto or Ether 2
Are IP address and subnet mask set correctly for
printer and host?
NO
Set to Auto or Ether 2
YES
When router exists between host and printer, is
router setting correct?
NO
Set router correctly or access
YES
printer from a host which
does not go through router.
When router exists between host and printer, is
default gateway setting correct?
NO
Set default gateway correctly
YES
for both printer and host.
Less than two Telnets are connected
simultaneously.
NO
Close a Telenet session
YES
OkiLAN 320e Network Card