Frame Types - Oki OKILAN 3100e User Manual

Frame Types.

This network card can select the following frame types, but please note that certain network functions will become
disabled depending on the setup. SNMP and OkiView utility can be used independent of the frame type setting.
Frame Type Setting
Auto (default)
EtherNet 2
IEEE 802.2
IEEE 802.3
SNAP
Please note the following when using the Microsoft
Internet Explorer:
1. You must not drag the sub-window located at the
left of the main window. If you do, the sub-
window at the left of the screen will no longer be
displayed. To display the sub-window again, re-
start the browser.
2. To enable the "Update" button of the "Printer
Status" window, click "Set..." button of the
"Internet temporary files", on the "Options..."
detail setting screen of the "Display" menu. On
the "Setup" screen, set the "Check the new
version of the saved page:" to "Check every time
Chapter 4 - Administrating Network Printers
Layer 3
All supported services available All supported services available All supported services available
ARP, RARP, ICMP,RIP
RIP
RIP
RIP
Supported Service
Layer 4
Telnet, FTP, LPR, HTTP (Web), DHCP, R-
Printer, Q-Server, SAP
R-Printer, Q-Server, SAP, NetBEUI (SMB)
SAP, R-Printer, Q-Server
EtherTalk (PAP), R-Printer, Q-Server, SAP
the page is displayed". Setting this enables the
printer status to be searched every time the
"Update" button is clicked.
Please note the following when using Netscape
Navigator:
1. To enable the "Update" button of the "Printer
Status" window, set "Verify Documents" to
"Once per Session", on "Cache" screen of
"Network Preferences..." menu. Setting this
enables the printer status to be searched every
time the "Update" button is clicked.
2. If you change the size of the Web page with a
browser immediately after you change the printer
Layer 5 or higher
English
43