Oki OKILAN 3100e User Manual page 69

3. Press MENU1 button repeatedly to display
NETWORK. After NETWORK is displayed,
press ENTER button.
4. TCP/IP is displayed. Press MENU1 button
repeatedly to move to NET MNT and press
ENTER button.
5. Press MENU1 button repeatedly to display
FACTORY RESET. After FACTORY RESET is
displayed, press ENTER button.
6. Wait for about 20 seconds until the printer
restarts.
This operation produces the same effect as if you reset
the Network card with "TEST" button.
(Refer to the sub-section 2.2, "Resetting the Network
card to the Factory default.)
Chapter 4 - Administrating Network Printers
English
63