Setting The Batch Tx Time Function; Send A Fax As Part Of A Delayed Batch - Oki OKIFAX 5750 User Manual

Setting the Batch TX Time Function

!
Locations used for Delayed Batch Transmission
must be programmed into
Speed Dial numbers 31 through 40
before the Batch TX Time may be set.
1 Press Menu/Exit to enter the menu.
to select Location Program. Press Enter.
2 Press
to select Batch TX Time. Press Enter.
3 Press
4 Enter the Speed Dial number of the desired location.
Use the numeric keypad to enter the number.
Press Enter.
5 When prompted, enter the desired time.
Press Enter.
!
Use the 24-hour format to enter times.
For example, 0800 is 8:00 AM, 2000 is 8:00 PM.
Remember that delayed batch transmissions are sent at
the same time every day!
6 Press Menu/Exit to exit.
|
92 OKIFAX 5750/5950

Send a Fax as Part of a Delayed Batch

1 Load the document(s).
2 Press Menu/Exit key to enter the menu.
to select Delayed Batch TX, press Enter .
3 Press
4 Enter the Speed Dial number of the desired location
using the assigned One Touch key or the numeric
keypad. Press Enter.
!
Locations used for Delayed Batch Transmission must
be programmed into Speed Dial numbers
31 through 40.
5 Location and transmission time set displays. Press Start.
6 The machine scans the document(s) into memory, and
waits until the programmed time to begin transmission.
7 Repeat above steps 1-7 to prepare multiple sessions.
!
Use the 24-hour format to enter times.
For example, 0800 is 8:00 AM, 2000 is 8:00 PM.
The amount of available memory determines how many
batch transmissions you may set. Once memory is filled,
no more sessions will be accepted.