DCS WODV230 User Manual page 45

PROBLEM
General
I can feel hot air
blowing out of the vents
after I have turned the
oven off.
The oven fan comes on
when I select a function
that does not use a fan
(eg BAKE)
The oven has reached
the set temperature
but the temperature
knob halo is still white
(indicating that the oven
is not ready to use).
The oven is heating but
the display is dark.
The oven cancels
automatic cooking when
I try to adjust the clock
setting.
The oven sounds a tone
when I try to turn the
temperature knob below
a certain temperature.
The temperature knob
halo doesn't turn white
when I use BROIL/MAXI
BROIL
TROUBLESHOOTING
POSSIBLE CAUSES
This is normal.
This is normal.
The fan comes on while the
oven is preheating. It may turn
off when the oven has reached
the set temperature.
This is normal: when heating
up from cold, your oven is
designed to initially heat to a
temperature somewhat higher
than what you have set. This
is to provide optimal baking
conditions right from the start.
The oven is in Sabbath setting.
The oven was set for automatic
cooking when you were trying
to adjust the clock setting.
This is normal: for food safety
reasons, the oven functions
have factory-set minimum
temperature settings.
This is normal: the halo stays orange to indicate that the broil
element provides instant radiant heat.
WHAT TO DO
For safety reasons the
cooling fans will continue
to run even when you have
turned the function knob
to 'Off'. The fans will switch
off automatically when the
oven has cooled.
Wait until a long
tone sounds and the
temperature knob halo
turns orange: the oven will
then be ready to use.
Wait until a long
tone sounds and the
temperature knob halo
turns orange: the oven will
then be ready to use.
To quit Sabbath setting,
press and hold CANCEL
until the display shows the
time of day.
You can only adjust the
clock setting while the oven
is not set for automatic
cooking.
The temperature knob
itself cannot be 'turned
off'. Selecting Off with the
function knob will turn the
oven off.
41