Mitsubishi Electric FR-A8NP Instruction Manual page 38

Parameter
Max_Data_Len
Fail_Safe
Max_Diag_Data_Len
Slave_Family
PrmText
Text(0)
Text(1)
EndPrmText
ExtUserPrmData
Bit(0) 0 0-1
Prm_Text_Ref
EndExtUserPrmData
Max_User_Prm_Data_Len
Ext_User_Prm_Data_Const(0)
Ext_User_Prm_Data_Const(1)
Ext_User_Prm_Data_Ref(1)
Module
EndModule
Module
EndModule
Module
Value
56 Input and output data: Maximum 28 + 28 = 56 bytes
0 Failsafe not supported
6 Diagnostic data of 6 bytes secured (no external diagnosis)
1 Drives defined as function class (Main Family)
1 Text selection 1 registration
"No byte swapping" If Bit 0 = 0, "No byte swapping"
"Byte swapping" If Bit 0 = 1, "Byte swapping"
1 "Byte swapping" Byte swapping selection 1 registration on text base
Bit 0 = default 0, range 0 to 1
1 Text selection 1 is used.
2 User parameter of 2 bytes secured
H01 Initial value of user parameter's 1 byte
H00 Initial value of user parameter's 2 byte
Byte swapping selection 1 is used on text base in user parameter's 2
1
byte.
"PPO type 1" HF3, HF1 PPO type 1 selection
"PPO type 2" HF3, HF5 PPO type 2 selection
"PPO type 3" HF1 PPO type 3 selection
Description

PROFIBUS DEVICE DATA
6
37