Installation Procedure - Mitsubishi Electric FR-A8NP Instruction Manual

2.2

Installation procedure

 Installing the communication option LED display cover
(1) Remove the inverter front cover. (Refer to Chapter 2 of the Instruction Manual (Detailed) of the inverter for details on how
to remove the front cover.)
Mount the cover for displaying the operation status indication LED for the communication option on the inverter front cover.
(2) Cut off hooks on the rear of the inverter front cover with nipper, etc. and
open the window for fitting the LED display cover.
(3) Fit the communication option LED display cover to the front side of the
front cover. Align the LED display cover with the LED position on the
circuit board of the option. Push the LED display cover until it is fixed with
the hooks.
NOTE
The protective structure (JEM1030) changes to the open type (IP00).
Caution
 Take care not to hurt your hand and such with portions left by cutting hooks of the rear of the front cover.
Cut off with a nipper, etc.
Cut off with a nipper, etc.
Communication option LED display cover
INSTALLATION
2
11