Mapping Devices: Ndmp; Map Devices Automatically; Map Devices Manually; Assign Ndmp Names To Devices - ATTO Technology iPBridge 2500C Installation And Operation Manual
Atto user manual ipbridge 2500c/r/d
Hide thumbs
Also See for iPBridge 2500C:
- Installation and operation manual (72 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
Access to SCSI devices is via SCSI bus, target and LUNs. CLI commands are used to modify the
mapping. The easiest way to map devices is to use the Automap command through the ATTO
ExpressNAV interface.
Note
For NDMP-configured iPBridge 2500 models
only.
The ATTO Technology ExpressNAV, a browser-
based configuration tool, allows you to map
devices to the SCSI ports using a web-based GUI.
Refer to
ATTO ExpressNAV interface
21.
Map devices automatically
1
From the ExpressNAV main menu, click on the
Mapping menu item on the left side of the
screen.
2
Click AutoMap
3
Click Submit
13
ATTO Technology Inc. iPBridge Installation and Operation Manual
2.3 Mapping devices: NDMP
on page
Map devices manually
1
From the ExpressNAV main menu, click on the
Mapping menu item on the left side of the
screen.
2
Select the devices from the box on the right
hand side of the screen and drag to the
appropriate LUN on the left.
3
Click Submit.
Assign NDMP names to devices
1
From the ExpressNAV main menu, click on the
Mapping menu item on the left side of the
screen.
2
Type the NDMP names you want in the boxes
at the right.
3
Drag the boxes to the ports you want.
4
Click Submit.
Advertisement
Table of Contents
