Chassis Support Bracket; Removing The Chassis Support Bracket - Dell Vostro 220 Service Manual

Chassis Support Bracket

Removing the Chassis Support Bracket

1 Follow the procedures in "Before Working on Your Computer" on page 35.
2 Remove the computer cover (see "Removing the Computer Cover" on
3 Remove the screw that secures the chassis support bracket.
4 Rotate the flange away from the back of the computer.
5 Disengage any cables stored in the cable clip at the top of the support
6 Lift the end of the support bracket at the back of the computer.
7 Slide the tabs at the other end of the bracket out of the slots in the chassis,
Downloaded from www.Manualslib.com
CAUTION:
Before working inside your computer, read the safety information that
shipped with your computer. For additional safety best practices information, see
the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To guard against electrical shock, always unplug your computer from
the electrical outlet before removing the cover.
NOTE:
Only the Vostro 220s includes a chassis support bracket. You must remove
the bracket before you can remove or replace many of the computer components.
page 47).
bracket.
and remove the bracket out of the computer.
manuals search engine
Chassis Support Bracket
55