1 screws (2)
3 optical drive
5 power cable
5 For the Vostro 420 and Vostro 220, remove the two screws securing the
6 Slide the optical drive out through the front of the computer.
7 If you are installing a replacement drive, skip to step 5 in "Replacing or
8 Disconnect the data cable from the system board (see "System Board
9 For the Vostro 420 and Vostro 220, use two screws to attach a 5.25-inch
Downloaded from
www.Manualslib.com
4
5
optical drive to the drive cage.
Adding an Optical Drive" on page 82.
If you are removing this drive permanently and the drive bay is to remain
empty, proceed to step 8.
Components" on page 40), and remove the cable from the computer.
front-panel insert to the front of the empty bay.
manuals search engine
1
3
2 screw holes (4)
4 data cable
2
81
Drives