Dell Vostro 220 Service Manual page 78

b
c
1 inside of bezel
3 cover for empty bay
5 Remove the media card reader from its packaging.
6 For the Vostro 220s, install two screws on each side of the media card
reader.
7 Gently slide the device into the bay from the front of the computer.
8 For the Vostro 420 and Vostro 220:
a
b
78
Downloaded from www.Manualslib.com
For the Vostro 220s, lift the release latch that secures both the optical
drive and the 3.5-inch device in their respective drive cages.
Remove the empty-bay cover from the bezel: From the inside of the
bezel, press the release latch on the cover, and lift the cover from the
bezel.
3
Align the screw holes in the device with the screw hole and slot in the
drive cage.
Replace and tighten the two screws to secure the device in the drive
cage.
Drives
manuals search engine
1
2
2 release latch