Replacing The Chassis Fan - Dell Vostro 220 Service Manual

Replacing the Chassis Fan

1 For the Vostro 220s:
2 While holding the chassis fan in place, align the screw hole(s) and install
3 Attach the fan cable to the system board (see "System Board Components"
4 Follow the procedure in "After Working on Your Computer" on page 45.
Downloaded from www.Manualslib.com
Lower the fan into the chassis such that the screw hole in the fan is
a
offset and slightly forward of the screw hole in the fan mount on the
chassis.
Press the fan into the side of the chassis, and then slide it toward the
b
back of the computer until it sets against the stops.
Proceed to step 3.
c
the screw(s) that secure the fan to the chassis.
on page 40).
manuals search engine
97
Fan