Dell Vostro 220 Service Manual page 72

Vostro 220
4
3
6 Connect the power and data cables to the back of the drive.
NOTICE:
missing pin on one connector fits with a tab or a filled-in hole on the other
connector. Align the cable connectors correctly before inserting them to avoid
damage to the connectors.
7 Ensure that the other end of the data cable is connected to an interface
connector labeled "SATA0," "SATA1," "SATA2," or "SATA3" on the system
board (see "System Board Components" on page 40).
72
Downloaded from www.Manualslib.com
1 screws (4)
3 power cable
The connectors are "keyed" for correct insertion; that is, a notch or a
Drives
manuals search engine
1
2 hard drive
4 data cable
2