Dell Vostro 220 Service Manual page 123

5 Connect the power supply cables to the system board (see "System Board
6 Connect all front panel cables to the system board (see "System Board
7 Connect all the data cables from the drives to the system board (see
8 Connect any additional cables to the system board as required.
9 Install all expansion cards (see "Installing a PCI or PCI Express Card" on
10 Slide the optical drive back fully into the drive bay.
11 Check all cable connections throughout the computer chassis to ensure
12 Follow the procedure in "After Working on Your Computer" on page 45.
Downloaded from www.Manualslib.com
Install the processor onto the system board (see "Replacing the
b
Processor" on page 126).
Install the processor heat sink/fan assembly (see "Replacing the
a
Processor Heat Sink/Fan Assembly" on page 101).
Components" on page 40 for connector locations).
Components" on page 40 for connector locations).
"System Board Components" on page 40 for connector locations).
page 60).
that they are secure. See "System Board Components" on page 40 to help
identify connectors on the system board.
manuals search engine
123
System Board