Touchpad - HP Spectre 13x2 Pro Maintenance And Service Manual

TouchPad

Description
TouchPad (includes cable)
Before removing the TouchPad, follow these steps:
1. Turn off the tablet and keyboard base. If you are unsure whether the tablet and keyboard base are off
or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2. Disconnect the power from the tablet and keyboard base by unplugging the power cord from the tablet
and keyboard base.
3. Disconnect the tablet from the keyboard base.
4. Remove the bottom cover (see
5. Remove the I/O board (see
Remove the TouchPad:
1. Remove the six Phillips PM2.0×3.25 screws (1) that secure the TouchPad to the keyboard base.
2. Remove the TouchPad (2).
Reverse this procedure to install the TouchPad.
68 Chapter 5 Removal and replacement preliminary requirements
Bottom cover on page
I/O board on page 66).
65).
Spare part number
742389-001