Display Panel Cable; Card Reader Board - HP Spectre 13x2 Pro Maintenance And Service Manual

Table of Contents

Advertisement

Display panel cable

NOTE:
The display panel cable is included in the Cable Kit, spare part number 742103-001. See
on page 21
for more Cable Kit spare part information.
Before removing the display panel cable, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
5.
Remove the tablet battery (see
Remove the display panel cable:
1.
Release the adhesive strip (1) that secures the display panel cable connector to the display assembly.
2.
Use the display panel cable connector bar (2) to disconnect the display panel cable (3) from the display
panel.
3.
Disconnect the display panel cable (4) from the system board.
4.
Remove the docking panel cable board (5).
Reverse this procedure to install the display panel cable.

Card reader board

Description
For use only on computer models equipped with WWAN capability (includes micro SD Card Reader slot
and SIM slot)
Back cover on page
36).
Tablet battery on page
37).
Removal and replacement procedures
Cable Kit
Spare part number
746491-001
57

Advertisement

Table of Contents
loading

Table of Contents