Norton C3120 Owner's Manual page 32

Oil Specifications:
Oil Type (Shipped from factory):
Oil Change Quantity with Filter:
Oil Quality Grade:
Lube Oils are differentiated by Deutz according to their performance and quality
class. Oils of other comparable specifications can be used. If you have any
questions please contact your local Deutz service center.
Approved Oils:
Deutz
ACEA
API
DHD
See the Deutz Operation Manual or contact your local Deutz Service Center for
more information.
Oil Viscosity:
DQC I
CF/CF-4 CG-4/CH-4
CF/CF-4 CG-4/CH-4
-NA-
In general multi-viscosity oils should be
used. The viscosity of oil to be used is
dependent on the ambient temperature of
the environment that the engine will be
operating in. Use the table to the left to
determine the SAE grade based on ambient
environment temperatures. If the ambient
temperature is lower than the limits of the
SAE grade selected the cold starting
performance of the engine will be affected.
Do not exceed the temperature application
limits for the SAE grade selected for
extended periods of time. For more
information see the Deutz Operation Manual
or contact your local Deutz Service Center.
32
SAE 20W20
8.45 qt (8 liters)
DQC II
DHD-1
DQC III
-NA-
-NA-
-NA-